Palmer PB 20 Press Patch Box 20-Channel
- Signal distributor with 20 outputs
- Isolated transformer-balanced XLR inputs for microphone and line level signals
- High-quality input amplifier with gain control and +20 dB switch
- 10 LEDs for level display from -40 to +10 dB
- 20 transformer-balanced XLR outputs with paired driver circuitry and individual ground lift switches on the rear
- 2 additional 6.35mm stereo jacks and RCA outputs
- Nominal output Level +4 dBu/600 Ohms, jack and RCA outputs -10 dBu
- Adjustable 6.35 mm headphone output
- Summed input and cascaded output
- Integrated shielded power supply
- DC input for emergency power supply
PAN 02 DI Box active
Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm.
PROEL AMP03VR 30W Amplifier with MP3 Player and Recoder
- our outputs, three of which at constant voltage (100V / 70V / 25V) and one with constant impedance (4 Ohm)
- MIC1 input priority function
- MP3 file recorder / player module
- USB and SD / MMC card input
- Optional vehicle kit including amplifier fixing bracket and power cable
- Complete with fuse
- Power supply: 220VAC / 117 VAC 50-60 Hz; 12 VDC
PROEL EK8NF 8” NEAR-FIELD STUDIO MONITOR
PROEL EK8NF 8” NEAR-FIELD STUDIO MONITOR
- Bi-amplified 2-way system
- 1 “soft-dome tweeter for detailed response and a high-resolution sound
- Proprietary integrated elliptical waveguide with accurate directivity control
- Long-excursion 8” woofer with lightweight fiber-glass composite cone
- Precisely calculated front tuning port for greater low-frequency extension
- Multiple audio input connectors for connecting any kind of source
- HF adjustment for a flexible control of high frequency response
- Sophisticated, carefully designed crossover filters for an improved resolution
- High-headroom Class AB 45+75W amplifiers with dual accurate CLIP LIMITER
Proel MQ12USB Compact 12-channel mixer with FX and USB
Proel MQ12USB Compact 12-channel mixer with FX and USB
- Compact 12-input 4-bus mixer with effect and USB I/F
- 4 MONO MIC/LINE inputs, 2 STEREO MIC/LINE inputs and 2 STEREO LINE inputs
- 6 low-noise, very high-headroom microphone preamplifiers
- PHANTOM power
- ‘One-knob’ COMPRESSOR with LED indicator on MONO channels
- 3-band EQ with sweep mids and LO-CUT filter
- 1 AUX send pre-fader and 1 AUX send post-fader
- 24bit studio-grade digital effect with 100 presets, 2-digit display and footswitch MUTE
- Built-in USB interface for PC recording and playback
- GROUS 1&2 with MIX routing and output
- HEADPHONES and CONTROL ROOM outputs
- Electronically balanced MAIN MIX outputs with XLR-M and ¼” JACK connectors
- Two 8-LED VU-METERS
- Universal switching power supply 100-250V
- Stage-proof construction and ultra-rugged metal chassis
- Designed and engineered in Italy by PROEL
Proel SPSK300BK Professional aluminium speaker stand
SPSK300BK Professional aluminium speaker stand
- Professional aluminium speaker stand
- Screw locking system, a steel security pin
- “Air-cushioned” air-damped release device to grant a flexible, fast and easy adjustment.
- Available in black anodized aluminium (SPSK300BK) and in silver anodized aluminium (SPSK300AL) finish.
Proel Wall Mounted Loudspeaker
Proel PAWSO4 wall mounted Speaker
- Type: wall-mounted speaker
- Mounting system: Screw
- Power: 10W / 5W @ 100V
- Speaker: broadband 6 "
- Constant voltage: 100V
- Frequency Response, (-10 dB): 110 Hz - 13 kHz
- Sound pressure level: 101 dB
- Coverage angle: 110 ° / 85 °
- Body materials: ABS / steel
- White color
- Dimensions: 24 x 34.5 x 10.1 cm
- Weight: 1.6KG
Professional microphone stand with fixed boom
RSM195BK Professional microphone stand with fixed boom.
- Construction materials: Steel - Die-cast aluminium - Soft grip nylon - Nylon
- Base dimension: Ø 720 mm
- Minimum height: 975 mm
- Maximum height: 1580 mm
- Weight: 2,2 kg
- Boom length:: 820 mm
- Color: Matt black
- 3/8” end threaded with 5/8” adapter included
PROFILO LED 200 High-power versatile alternative
PROFILO LED 200 is a high-power LED-based profile spot contained in a strong and lightweight housing. The unit features an internal four-shutter removable shaping system, and a high-definition 15.5° to 38° linear zoom. The unit is equipped with a high efficiency 200 W White 3200 K LED source. PROFILO LED 200 is suitable for medium to large TV studios and theatres and it is a powerful and versatile alternative to conventional lights.
PROFILO LED 80 – The DTS LED-based Profile Spot
PROFILO LED 80 is a LED-based profile spot contained in a strong and lightweight housing. The unit features an internal four-shutter shaping system, and a 20° to 36° linear zoom. The unit is equipped with a high efficiency 80 W white LED source available with 3000K, 4000K or 5000K color temperature. The unit is suitable for small to medium TV studios, theatres or museums and it is a valid alternative to conventional lights. Thanks to a dedicated kit is possible to instal the fixture on electrified rails.
RD Net Controller for 2 Lines per 32 Speakers
The RDNET system was purposely developed to create a data network for monitoring and command of more systems.
The RDNET CONTROL 2 unit can manage up to 2 subnets. Up to 32 devices can be connected to each subnet (2 subnets x 32 = total 64 devices).
The addressing of the various devices is handled automatically by RDNET CONTROL 2 interface.
Each device is assigned a unique address during the power on procedure of network.
